Watchmaker Forum

General Category => Escapement => Topic started by: kanikune on April 01, 2014, 04:26:36 PM

Title: Pallet fork end shakes
Post by: kanikune on April 01, 2014, 04:26:36 PM
Here are two examples of pallet fork end shake. To my understanding end shake in good quality watch is non-existing. Also worth considering, how the movement is fixed to the case of the watch. If mainplate can be distorted slightly due to tightening to the case, too little end shake can bind the pallet.

http://youtu.be/LcR0Ytoolms

http://youtu.be/d6oStszImP0
Title: Re: Pallet fork end shakes
Post by: Toysathinee on January 09, 2018, 11:52:21 AM
I am so glad to read this useful content. I like it very much.