Author Topic: Going Train Backlash on assembly  (Read 1422 times)

kanikune

  • Administrator
  • Full Member
  • *****
  • Posts: 113
  • Karma: 0
Going Train Backlash on assembly
« on: April 02, 2014, 10:04:16 PM »
During assembly before putting the Pallet Fork back to the movement it is good habit to try the Going Train backlash.
This can be checked by turning crown until mainspring takes one click.
You should see escape wheel to spin and finally reverse significantly.

In the video the first twitch for me placing my finger on the crown. The start of  the backlash is quite difficult to spot.
http://youtu.be/OpB6L_wjN9c

Sadudinhun

  • Newbie
  • *
  • Posts: 2
  • Karma: 0
Re: Going Train Backlash on assembly
« Reply #1 on: November 22, 2017, 12:34:28 PM »
I have seen that it is true and believe in this.

Yungyurt

  • Newbie
  • *
  • Posts: 2
  • Karma: 0
Re: Going Train Backlash on assembly
« Reply #2 on: June 04, 2018, 06:35:54 AM »
I have used the link and it is very good.